Samsung RF4267HA User Manual

Also see for RF4267HA: User manual User manual

08_ setting upASSEMBLE THE FLEx DOORTo reattach the flex doors after you have moved thefridge to its final location, assemble parts in reverse order.DISASSEMBLE THE FREEzER DRAWER1. Take out theupper drawerby lifting it up.2. Remove the freeze room guard ( 1 ) by lifting theguard up.3. Take out the lowerbasket ( 3 ) bylifting the basketup from the railsystem.4. Remove 4 hexhead bolts fromboth sides witha socket wrench(10mm).5. Lift up the freezerdoor from the rails.ASSEMBLE THE FREEzER DRAWERTo reattach the drawer after you have moved the fridgeto its final location, assemble parts in reverse order.ADjuSTING THE LEvELMake sure the refrigerator is level so that you canmake final adjustments. Use a level to test if therefigerator is level both side to side and back to front. Ifthe refrigerator is not level, it will not be possible to getthe doors perfectly even, which may cause moisturecondensation and increased energy bills. Below is anexample of how to level the refrigerator if the left sideof the refrigerator is lower than the right side.How to adjust the levelInsert a flat-blade screwdriver (-) into a notch on theleft control lever, and turn it count clockwise to levelthe refrigerator. (You turn the lever clockwise to lowerthe refrigerator and counterclockwise to raise it.)Both control levers must be touching the floorto avoid possible personal injury or propertydamage because of tipping.If the right side is lower, perform the sameprocedure, but with the right control lever.It is difficult to remove the cover leg front fromthe refrigerator, so we do not recommendmaking small adjustments wIth the controllever. Instead, refer to the next page for thebest way to make minor adjustments to thedoors.MAkING MINOR ADjuSTMENTSBETWEEN DOORSRemember, a leveled refrigerator is necessary forgetting the doors perfectly even. If you need help,review the previous section on leveling the refrigerator.13flat-blade screwdriver(-) control LevercAuTION