Samsung RF4267HA User Manual

Also see for RF4267HA: User manual User manual

setting up _0701 SETTING uP2. Disconnect one connector ( 3 ) on the right sidedoor and one connector ( 4 ) on left side door. Toremove the water coupler from the hinge, twistand pull it from the hinge. Remove the water line( 5 ) while pressing the marked part ( 6 ) of thewater line coupler.If a red clip is on the coupler, it must beremoved before removing the tube.3. Pull and remove the hinge lever ( 7 ) . Remove theground screw ( 8 ) attached to the upper left andright door hinges with a philips screwdriver (+).Remove the upper left and right door hinges ( 9 ).4. Lift the door straightup to remove.5. Remove the screw ( 10 ) attached to the lowerleft and rightdoor hingeswith a philipsscrewdriver (+).Remove the 2hex head bolts( 11 ) attachedto the lower leftand right doorhinges with an allen wrench (3/16”). Remove thelower left and right door hinges ( 12 ).REATTAcHING THE REFRIGERATORDOORSTo reattach the fridge doors after you have moved thefridge to its final location, assemble parts in reverse order.DISASSEMBLE THE FLEx DOOR1. Take out the FlexZone ( 1 ) by liftingit up.2. Take off the cover( 2 ) w/harnesswith a flat-bladescrewdriver (-).3. Disconnect the housingconnector.4. Remove 2 hex headbolts from sides witha socket wrench(10mm).5. Lift up the Flex door fromthe rails.12cAuTION4563Red clip(1/4")7 89Allen wrench12101112