Samsung RF50 Series User Manual

Also see for RF50 Series: User manual

English 19AssemblyLevel the refrigerator and adjust the height of the doorTools you may need (unprovided)Cross screwdriver (+) Flat head screwdriver (-) Ring wrench (10 mm)Pincer Allen wrench (4 mm) Allen wrench (5 mm)Warning• Prior to leveling the refrigerator and adjusting the height of the door, pleaseplug the power plug out.How to level the refrigeratorIf the refrigerator is not placed level, a height difference between the refrigeratordoors may produce.• Insert the flat head screwdriver (-)into the groove of the horizontallyadjusted stand bar control rod, thenrotate the control rod clockwiseor anticlockwise so as to level therefrigerator. Rotate the control roodclockwise to lower the refrigerator.Rotate the control rood anticlockwiseto raise the refrigerator.Note• If the front and back position of the refrigerator is not level, please put a solidsubplate under the stand bar behind the support (such as plastic plate and plasticruler), and then fix it with plastic cement. When pushing the refrigerator to theinstallation position, please be sure that the back stand bars are on the subplate.• If you use wooden floor or similar soft floor, please be careful not to damagethe floor when pushing the refrigerator.