Operating _2302 oPERatinGice offThis icon will light up when you press the “Ice Off” button. In this case, the ice will not be produced.Energy saverThis icon will light up when you press the Energy saver button. The Energy Saver function is automaticallyset to “ON” when power is supplied to the refrigerator. If condensation occurs on the doors, turn theEnergy Saver mode off.LightingThis icon will light up when you press the Lighting button. In this case, the dispenser light(under thedisplay) will be on constantly. If you would like the dispenser light to come on only when using thedispenser, turn the Lighting mode off.alarmThis icon will light up when you press the alarm button. The door alarm will sound if any door is open formore than 3 minutes. The beeping stops when you close the door. Initially the Alarm is set to on.LockThis icon will light up when you press the Lock button. In this case, you won’t be able to use the controlpanel. If you press and hold the Ice Off/Hold button for 3 sec to unlock Child Lock, you will be able to usethe control panel again.ContRoLLinG tHE tEMPERatuREBasic temperature of Freezer and Refrigerator CompartmentsThe basic temperature and/or recommended temperatures of the freezer and refrigerator Compartmentsare -2°F and 38°F respectively. If the temperature of freezer and fridge Compartments are too high or low,adjust the temperature manually.Controlling the Freezer temperatureThe freezer temperature can be set between 8°F and -8°F to suityour particular needs. Press the freezer button repeatedly untilthe desired temperature is shown in the temperature display. Thetemperature will move 2°F degrees each push (-2°F → -4°F →-6°F → -8°F → 8°F → 6°F → 4°F → 2°F → 0°F → -2°F). Keep inmind that foods like ice cream may melt at 4°F. The temperaturedisplay will move sequentially from -8°F to 8°F. Five secondsafter the new temperature is set, the display will show the actualcurrent freezer temperature until the new temperature is reached.using the Power FreezeIf you need a lot of ice or if you want to cool down the freezerfaster, you can use the Power Freezer function. Press andhold the Freezer/ Hold 3 sec for Power Freezer button for3 seconds. Then, the power freeze indicator will light andactivate the power freeze mode independent of the freezer settemperature. If you select Power freeze, the inside temperatureof the freezer will decrease for about two and a half hours.When you have enough ice, just press and hold the button for3 seconds again to cancel the Power Freeze mode. Then,the indicator will go out and the freezer will return to the settemperature again.