Samsung RFG237 Series User Manual

Also see for RFG237 Series: User manual User manual

Contents

Operating _2902 oPERatinGOperating your French Door Refigerator(RFG238 MODEL)using the ice DispenserPlace a glass underneath the ice dispenser and push gently against the dispenser lever with your glass.Make sure the glass is in line with the dispenser to prevent the ice from bouncing out.CautionWhen Cubed Ice is selected after using the Crushed Ice mode, a small amount ofresidual crushed ice might be produced.CautionBefore or during using, wash ice bin/bucket with a mild detergent, rinse well,and dry thoroughly it. Do not use harsh or abrasive cleaners or solvents.CautionPlease wait 2 seconds before removing the glass under the dispenser to prevent spills.If the Refrigerator door opens, the Dispenser does not work.PUSHControlling the fridge temperatureThe fridge temperature can be set between 46°F and 34°F to suit your particular needs. Press the fridge buttonrepeatedly until the desired temperature is shown in the temperature display. The temperature will move 2°Fdegrees each press(38°F → 36°F → 34°F → 46°F → 44°F → 42°F → 40°F → 38°F). The temperature controlprocess for the fridge works just like the freezer process. Press the fridge button to set your desired temperature.After a few seconds, the fridge will begin adjusting towards the newly set temperature. This will be reflected in thedigital display.- The temperature of the Freezer, fridge or Pantry Room may risewhen you open the doors too frequently, or if a large amount ofwarm or hot food is placed inside.- This may cause the digital display to blink. Once the Freezer andfridge temperature return to their normal set temperatures, theblinking will stop.- If the blinking continues, you may need to “reset” the Refrigerator.Try unplugging the appliance, wait for around 10 minutes and thenplug the power cord back in.- If there is an communication error between the Display and Main Controller, the Pantry Display light may blink.Once the normal set temperatures are reached, the blinking will stop.If the blinking continues for a long period of time, please contact a Samsung Electronics Service Center.using the Power CoolFor a quick Fridge cool down, use the Power Cool function. Pressand hold the Fridge/Hold 3 sec for Power Cool button for 3seconds. Then, the power cool indicator will light and activate thepower cool mode independent of fridge set temperature. If you selectPower Cool, the inside temperature of the fridge will decrease forabout two and a half hours or until 25°F is reached. Press and holdthe button for 3 seconds again to cancel the Power Cool mode.Then, the indicator will go out and the Refrigerator will return to theset temperature again.usinG tHE CoLD watER DisPEnsERPress the ice type or water button to select the type of you wantNo ICESelect this if you wantto turn ice maker off.