Samsung RFG237AA User Manual

Also see for RFG237AA: User manual Quick start guide Specifications Service manual Manual de usuario

Setting Up _1301 sEttinG uP5. Position the top table ( 2 ) in place. Insert and tightenthe 3 screws into the top table with a philips screwdriver(+). After door opened, reinsert the cap top table( 1 ) and close the doors.When reattaching the top table, make sure that thewires are not pressed or damaged by the hinge cover.After assembling, close the door and check to seewhether the door has gaps between gaskets or is tilted.If you see one of them, please refer to “Ad justing thedoors” page on 15.12REAttACHinG tHE REFRiGERAtoR DooRsThe dispenser door tube ( 5 ) must be fully inserted to the marked line toprevent water leakage from the dispenser.CAUTION33454. Connect the dispenser door tube ( 5 ) and theninsert a clip on the coupler with pulling tube. Connectthe connector ( 4 ) on the left side door and twoconnectors ( 3 ) at each side of the top cap.The clip is enveloped inside of the top cap.couplerdispenser door tube