01 sEttinG uPSetting Up _19instALLinG tHE wAtER LinEConnecting the water supply line to the refrigerator.There are several items that you need to purchase to complete this connection.You may find these items sold as a kit at your local hardware store.2 3Indicator sticker(month indicator)11. Slip the compression nut through the supplied plastic tubing .2. Tighten the compression nut onto the 1/4” compression fitting.- If you are using copper tubing, slip the compression nut (not supplied) and ferrule (not supplied) oncopper tubing (not supplied) as shown.- If you are using plastic tubing , insert the molded end(Bulb) of the plastic tubing into thecompression fitting.Do not use without the molded end(Bulb) of the plastic tubing .3. Tighten the compression nut onto the compression fitting. Do not over-tighten the compression nut .4. Turn water on and check for any leakage.Only connect the water line to a drinkable water source.If you have to repair or disassemble the water line, cut off 1/4“ of the plastic tubing to make sure you get a snug,leak-free connection.CAUTION1. Remove the water filter cover ( 1 )2. Remove the fixed cap ( 2 ) by turning it counter clockwise. Keepthe cap in a safe place for later use if you don’t use the filter.3. Remove the water filter ( 3 ) from the box and put areplacement indicator sticker (Indicator sticker is included inthe box) on the filter as shown. Place the sticker on the filterthat dates six months in the future. For example, if you installthe water filter in March, put the “SEP” sticker on the filterto remind you to replace it in September. This way, you canremember the time to replace the water filter. Normally, a filterlife is about 6 months.Installing the water filter.After remove the right side upper shelf, you can install thewater filter more easily.Plastic tubing(Supplied)Ferrule(Not supplied)Compression nut(1/4”) (Supplied)Compression fitting(Supplied)Molded end(Bulb)Compression nut(1/4”) (Not supplied)Copper tubing or Plastic tubing(Not supplied) (Not supplied)Household water supply lineRefrigeratoruse Copper tubing use Plastic tubing• ¼” copper tubing• ¼” compression nut (2pc)• Ferrule (2pc)• ¼” plastic tubing→ Molded end(Bulb)• ¼” compression nut (2pc)