Samsung RS2511 Series Service Manual

Also see for RS2511 series: Owner's manual and installation

Samsung RS2511 Series Service Manual Manual pdf 11 page image

11Mechanical DisassemblyThe ice dispenser is located in the upper portion ofthe freezer. This assembly stores ice made by theicemaker and dispenses ice.1. Lift the ice bucket up ① and slide out the icedispenser assembly ②.The ice maker is located inside of the ice dispenserassembly.1. Remove ice maker support screws (2), and slide out.2. Disconnect the ice maker wire connector.3. Unlock the locking tabs to separate the ice maker kit.In order to assemble the icemaker kit.1. Assemble the geared motor shaft and the front ofice tray.2. Lift the front locking tab and assemble the icemaker kit.3. Connect the ice maker wire connector.4. Match the tab holes and tabs(2) located on thetop of the liner, and slide the ice maker in.5. Tighten the screws (2) of the ice maker support.This shelf is designed to support the ice maker ＆ice dispensed and Xtra Space TM .1. Remove the Xtra SpaceTM cover to push it downand pull front.2. Slide the partition out.3. Remove the screws (2) on the bottom front of thecase.4. Slide out the case while disconnecting the wireconnect.Auger Motor CasePARTITIONSCREWSWIRE CONNECTORSUPPORT OF ICE-MAKERFRONT OF ICE TRAYFRONT LOCKING TABTAB HOLESGEARED MOTOR SHAFTICE-MAKER KITLOCKING TABIce Dispenser & Ice Maker