Samsung RS25H5002SL User Manual

Samsung RS25H5002SL User Manual Manual pdf 17 page image

English - 1701 SETTING UPFlooringFor proper installation, you must place thisrefrigerator on a level, hard surface that is thesame height as the rest of the floor.This surface should be strong enough to support afully loaded refrigerator.To protect the finish of the flooring duringinstallation, cut a large section of the cardboardcarton and place it under the refrigerator whereyou are working.When moving the refrigerator, you need to pull andpush it straight forwards or back.Do not wiggle it from side to side.When installing, servicing or cleaningbehind the refrigerator, be sure to pull theunit straight out and push back in straightafter finishing.Important: Make sure that you can easily moveyour refrigerator to its final location by measuringdoorways (both width and height), thresholds,ceilings, stairways, etc.The following chart details the exact height anddepth of this Samsung Side by Side Refrigerator.CAUTIONDimensions (mm)ModelRS25H50****WidthOnly Cabinet 908With Leg Front 915.5DepthOnly Cabinet 784With Door 857.5With Handle 91990° Open F 1169 / R 1295.5135° Open F 1017.5 / R 1107HeightOnly Cabinet 1742.5With Hinge 1776With Door 1776• Allow clearance to the right, left, backand top when installing.This will help reduce power consumptionand keep your energy bills lower.• Make sure you disconnect the water supply lineBEFORE removing the freezer door.To avoid damage, refer to ‘Separating the waterline from the refrigerator’ in the manual (page19).SETTING UP THE REFRIGERATORInstalling the handlesImportant : If you need to remove the refrigerator’sdoors to move it into place, install the handles afteryou put the doors back on.Take the handles out of the right side door.The handles are included in the package.DA68-02981F (EN)-150612.indd 17 2015. 6. 12. 11:20