English - 1901 SETTING UP2. Separate the water supply line fromthe refrigerator1. Remove one or two water lines, depending on) and) away.(1)(2)Your refrigerator may have one or twowater lines, depending on the model.If it has two, the lines are different colors.Make sure you match the colors when youre-attach them.Do not cut the water line.Gently separate it from the coupler.3. Remove the freezer doorA few things to mention first.• Make sure that you lift the door straight up sothe hinges are not bent or broken.• Be careful not to pinch the water tubing andwire harness on the door.• Place doors on a protected surface to preventscratching or damage.• Is necessary, have two people disassemble thedoors.CAUTION1. With the Freezer door closed, remove the1and then disconnect the wires by gently pulling2(2)(1)Be careful not to damage the sensorharness with the hinge cover.2. 3Socket Wrench.4counter-clockwise.5the arrow.Take care that the door does not fall on you.(4)(3)(5)Pressing3. Open the Freezer door, and then remove the67(7)(6)DA68-02981F (EN)-150612.indd 19 2015. 6. 12. 11:20