English - 1902 OPERATINGUSING THE CONTROL PANELFreezer/Fridge(Temperature adjustment)Press the Freezer or Fridge button until the desiredtemperature is set.Each time you press the Freezer or Fridge button,temperature indicator will change in below order.• Freezer0 °F → -1 °F → -2 °F → -3 °F → -4 °F → -5 °F →-6 °F → -7 °F → -8 °F → 5 °F → 4 °F → 3 °F →2 °F → 1 °F → 0 °F(-18 °C → -19 °C → -20 °C → -21 °C → -22 °C →-23 °C → -15 °C → -16 °C → -17 °C → -18 °C)❈ In Some Place Starts -19 °C.• Fridge37 °F → 36 °F → 35 °F → 34 °F → 44 °F → 43 °F→ 42 °F → 41 °F → 40 °F → 39 °F → 38 °F →37 °F(3 °C → 2 °C → 1 °C → 7 °C → 6 °C → 5 °C →4 °C → 3 °C)Power FreezeThis icon will light up when you activate the PowerFreeze function.Power Freeze function generates cool air for50 hours continuously and it makes the inside ofthe refrigerator cool faster.This function is useful when you make ice morequickly.When you have enough, just press and hold theFreezer/Power Freeze (3 sec) button again for 3seconds to cancel the Power Freeze function.When you use this function the energyconsumption of the refrigerator mayincrease.Remember to turn it off when you donot need it and return the freezer to youroriginal temperature setting.Energy SaverThis icon will light up when you activate the EnergySaver function.The Energy Saver function is automatically set to“ON” when power is supplied to the Refrigerator.If condensation occurs on the doors, turn theEnergy Saver function off.In some places, water drop may begenerated on the door part.In this case, it is recommended to turn offthe Energy saver function.LightingThis icon will light up when you activate theLighting function. In this case, the dispenser light(under the display) will be on constantly.If you would like the dispenser light to come ononly when using the dispenser, turn the Lightingfunction off by pressing the Lighting button.Control LockThis icon will light up when you activate the Lockfunction.In this case, you will not be able to use the controlpanel.If you press and hold the Lighting/Control Lock(3 sec) button again for 3 seconds, you will be ableto use the control panel again.Filter IndicatorWhen the filter indicator light changes to red, it istime to change the filter.Typically this happens about every 6 months.The filter Indicator will be Off when you initiallyinsert the water filter.The filter Indicator will be red when you have usedyour water filter for 6 months.SSEDA-14 (RS25H5121) ���.indd 19 2013. 11. 28. �� 11:28