70_ operatingTOucH ScREEN cORREcTIONYou can calibrate the stylus touch point to best meet your needs. To adjust the stylus touch point on the touchscreen:1. Press the button in the right bottom corner of the Settings list.2. Select [Touch Screen Correction] in the Settings list.3. Select the [Yes] button. A screen appears with pointer instructions on the top.4. Press down lightly on the center of the “+” mark. Repeat as the “+” mark moves across the screen.• If you do not press the center of the [+] properly, the cross mark appears repeatedly.If you cannot run the Touch Screen Correction function in Settings because the touch screen input point isincorrect:1. Press and hold the Epicurious icon on the home screen for 5 seconds.This will launch the select screen calibration function.2. The screen will display a series of cross icons.Press the exact center of each cross icon as it appears on the screen.S/W uPDATELets you check the current software version and update it to new software when available.1. Press the button in the bottom right corner of the Settings list.2. Select [S/W Update] in the Settings list.DA68-02500B.indb 70 2012.6.7 1:41:7 PM