18DISASSEMBLY & REASSEMBLY• Unplug the appliance before servicing or replacing electrical parts.• Remove any foreign matter or dust from the power plug pins.- Otherwise there is a risk of fire.• Do not use a cord that shows cracks or abrasion damage along its length or at either end.• Do not plug several appliances into the same multiple power board. The refrigerator should always beplugged into its own individual electrical which has a voltage rating that matched the rating plate.- This provides the best performance and also prevents overloading house wiring circuits, which couldcause a fire hazard from overheated wires.• Do not install the refrigerator in a damp place or place where it may come in contact with water.- Deteriorated insulation of electrical parts may cause an electric shock or fire.• In order to reduce the risk of electric shock the appliance must be properly grounded.• Do not put bottles or glass containers in the freezer.- When the contents freeze, the glass may break and cause personal injury.• Do not store volatile or flammable substances in the refrigerator.- The storage of benzene, thinner, alcohol, ether, LP gas and other such products may causeexplosions.- NEED TOOL3-1) PRECAUTIONITEM HOW TO USE PICTURESPhillips Head Driver 6TFGPSBTTFNCMJOHBOEEJTBTTFNCMJOHPGTDSFXFlat Head Driver6TFGPSBTTFNCMJOHBOEEJTBTTFNCMJOHPG#FWFSBHF4UBUJPO %JTQFOTFS %JTQMBZ$PWFS-BNQFUDHex Wrench ʡʡ2mm 6TFGPSBTTFNCMJOHBOEEJTBTTFNCMJOHPG)BOEMFSocket Wrench ʡʡ10mMagnet6TFGPSBTTFNCMJOHBOEEJTBTTFNCMJOHPG%PPS)JOHF6TFGPSDIFDLJOHPGUIF'3'BO