8_ setting upREMOVING THE REFRIGERATORDOORSIf your entrance won’t allow the refrigerator to passeasily through it, you can remove the doors.1. Removing the Front Leg CoverFirst, open both the freezer and refrigerator doors,and then take off the front leg cover by removing thethree screws counter-clockwise.Separating the Water Supply Line fromthe Refrigerator1. Remove the water line by pressing the coupler 1and pulling the water line 2 away.2. Removing the freezer doorA few things to mention fi rst.• Make sure that you lift the door straight up so thehinges are not bent or broken.• Be careful not to pinch the water tubing and wireharness on the door.• Place doors on a protected surface to preventscratching or damage.1. With the Freezer door closed, remove the upperhinge cover 1 using a screwdriver, and thendisconnect the wires by gently pulling them apart2 .2. Remove hinge screws 3 and the ground screw4 by turning counter-clockwise, and take off theupper hinge 5 . Be careful that the door does notfall on you as you are removing it3. Next, remove the door from the lower hinge 6 bycarefully lifting the door straight up 7 .Be careful not to pinch the water tubing andwire harness on the door.4. Remove the lower hinge 8 from the bracket 9by gently lifting the lower hinge upwards.213457612Be carefulthat thewater tube matchsame colour.