Samsung RSJ1FERS User Manual

Also see for RSJ1F Series: Service manual

setting up _1setting up your side-by-siderefrigeratorinstaLLing thE watEr DisPEnsEr LinEConnecting the water line to the refrigerator1. Remove the cap from water line on the unit and insert compression nut to the water line onthe unit after disassembling from provided water line.2. Connect both water line from the unit and water line provided kit.3. Tighten the compression nut onto the compression fitting. Be careful no gap between twoitems.4. Turn water on and check for any leakage.Only connect the water line to a drinkable water source.If you have to repair or disassemble the water line, cut off 6.5mm of the plastic tubing tomake sure you get a snug, leak-free connection.Before being used, the leakage in these places should be examined• Samsung Warranty doesnot cover WATER LINEINSTALLATION.• It’ll be done at customer’scharge except the retail priceincludes installation cost.• Please contact Plumber orAuthorized Installer for the installation if needed.• If Water leakage happened due to improper installation, Please contact installer.Installing the water filter.1. Remove the water filter from the box and puta replacement indicator sticker on the filter asshown.. Place a sticker on the filter that dates six monthsin the future. For example, if you install the waterfilter in March, put the “SEP” sticker on the filterto remind you to replace in September. Thatway you’ll know when it is time to replace thefilter. Normally filter life is about 6 months.. Next, remove the fixed cap by turning it counterclockwise. Keep the cap in a safe place for useif you choose not to use a filter.sticker(Month indication)101 sEtting uPRemovecapWater linefrom unitWater linefrom KitNo gaploosen aCAUTION