_ operatingFilter IndicatorWhen the filter indicator light is on, it is time to change the filter. Typically this happens aboutevery 6 months.After removing the old water filter and installing a new one (see page 36 for instructions on howto do this), reset the indicator status light by pressing the Ice Type button for about 3 seconds.The indicator will light again in about 6 months to let you know it is time to change your waterfilter.When you do not use the water filter, press the Ice On/Off button for more than 5 seconds, theFilter indicator lamp and the Filter Change letters will be off.Child LockThis icon will light up when you activate the Child Lock function by pressing Child Lock buttonfor 3 seconds. Press this button for 3 seconds again to reactivate. Use this function to preventchildren from tampering with temperature and filter settings.Cubed Ice, Crushed Ice and turnning the Ice maker off.Enjoy cubed or crushed ice by selecting your preferencefrom the digital control panel. If you don’t need ice, turnthe feature off to save on water and energy consumption.The Ice type light indicates the type of ice(or no ice) that iscurrently chosen.ControLLing thE tEMPEraturEControlling the Freezer temperatureThe freezer temperature can be set between -14°C (8°F) and -25ºC (-14°F) to suit your particularneeds. Press the Temp. button repeatedly until the desired temperature is shown in thetemperature display. Keep in mind that foods like ice cream may melt at -16ºC (4°F).The temperature display will move sequentially from -14°C (8°F) and -25ºC (-14°F). When thedisplay reaches -14ºC (8°F), it will begin again at -25ºC (-14°F).Five seconds after the new temperature is set the display will again show the actual currentfreezer temperature. However, this number will change as the Freezer adjusts to the newtemperature.Controlling the Fridge temperatureThe refrigerator temperature can be set between 7ºC (46°F) and 1ºC (34°F) to suit your particularneeds. Press the Temp. button repeatedly until the desired temperature is shown in thetemperature display.The temperature control process for the Fridge works just like the Freezer process.Press the Temp. button to set your desired temperature. After a few seconds, the Fridge willbegin tracking towards the newly set temperature. This will be reflected in the digital display.The temperature of the freezer or the refrigerator may rise from opening the doors toofrequently, or if a large amount of warm or hot food is placed in either side.This may cause the digital display to blink. Once the freezer and refrigerator return to theirnormal set temperatures the blinking will stop.If the blinking continues, you may need to “reset” the refrigerator. Try unplugging theappliance, wait about 10 minutes and then plug back in.ice type