110 Section 2I. Camera White Balance to adjust white balance based onchanging conditions (Auto, Sunny, Cloudy, Tungsten,Fluorescent, or Manual). (The default setting is Auto.) Night Shot to activate low light image capture.Enabling this feature allows you to take betterquality photos in low light conditions. Metering to allow the phone to sample the areabeing photographed and then determine the bestlight levels. Choose from either Spot (a specificarea of the image) or Average (the entire image issampled and then an average reading is used). Settings.. to select Resolution, Quality, Shutter Sound,Status Bar or Storage. (See Camera Mode Options fordetails.) Launch to Review Pictures or launch the Camcorder.Setting the Selftimer1. From camera mode, press Options (right softkey) >Selftimer.2. Highlight the length of delay you want the timer touse (5 sec or 10 sec) and press .(The default setting is Off.)3. Press when you are ready to start the timer.(The timer displays on the middle-right portion ofthe display screen during the self-timercountdown).4. Get ready for the picture. (The phone will beep foreach second of the countdown, and the outer LEDwill blink green. When the timer is down to threeseconds, the outer LED will blink red. Just beforethe picture is taken, the LED turns solid red.)To cancel the selftimer after it has started: Press or .Taking Multiple ShotsThis feature allows you to take a series of shots in acontinuous sequence.To shoot a series of individual pictures:1. From camera mode, press Options (right softkey) >Multi Shot > Series Shot.2. Select one of the following options and press : Off to deactivate the multiple shots option.Note While the sefltimer is active, all keys are disabledexcept and .Boost M540.book Page 110 Wednesday, March 24, 2010 4:48 PM
