Samsung Refrigerator User Manual

Also see for Refrigerator: Owner's manual User manual User manual User manual Owner's instructions

Contents

setting up _1101 SETTING UPIf you have to repair or disassemble the water line,cut off 6.5mm of the plastic tubing to make sure youget a snug, leak-free connection.Before being used, the leakage in theseplaces should be examined• Samsung Warranty does not cover WATER LINEINSTALLATION.• It’ll be done at customer’s charge unless the retailprice includes installation cost.• Please contact Plumber or Authorized Installer forthe installation if needed.• If Water leakage occurs due to improperinstallation, Please contact installer.1. Slip the compression nut (A) through the suppliedplastic tubing (A).2. Tighten the compression nut (A) onto the 1/4”compression fi tting.- If you are using copper tubing, slip thecompression nut (B) (not included) and ferrule(not included) on copper tubing (not included) asshown.- If you are using plastic tubing (B), insert themolded end(Bulb) of the plastic tubing (B) intothe compression fi tting.Do not use without the molded end(Bulb) ofthe plastic tubing (B).3. Tighten the compression nut (B) onto thecompression fi tting. Do not over-tighten thecompression nut (B).4. Turn water on and check for any leakage.Only connect the water line to a drinkablewater source.If you have to repair or disassemble the waterline, cut off 1/4“ of the plastic tubing to makesure you get a snug, leak-free connection.Connecting to the water supply line1. First, shut off the main water supply line.2. Locate the nearest cold, drinking water line.3. Follow the Water Line Installation Instructions inthe installation kit.4. After connecting the water supply to the waterfi lter, turn your main water supply back on andDispense about 3L to clear and prime the waterfi lter.Connecting the water line to therefrigerator1. Remove the cap from water line on the unit andinsert compression nut to the water line on theunit after disassembling from provided water line.2. Connect both water line from the unit and waterline in the kit3. Tighten the compression nut onto thecompression fi tting. Be careful no gap betweentwo items.4. Turn water on and check for any leakage.Only connect the water line to a drinkablewater source.CAUTIONThe water line must be connected tothe cold water pipe.If it is connected to the hot water pipe,it may cause the purifi er to malfunction.Close MainClose MainWater pipeWater pipeClose MainClose MainWater pipeWater pipeNo gapNo gapRemoveRemovecapcapWater LineWater Linefrom unitfrom unitWater LineWater Linefrom Kitfrom KitNo gapNo gapLoosen aLoosen aCAUTIONNo LeakNo LeakCAUTION

/ 20

Related manuals for Samsung Refrigerator

Samsung Refrigerator User Manual

This manual is suitable for:

Refrigerator RS12SW

manualsdatabase

Your AI-powered manual search engine