Safety information _05The refrigerator should alwaysbe plugged into its ownindividual electrical outletwhich has a voltage rating thatmatched the rating plate.- This provides the bestperformance and alsoprevents overloading housewiring circuits, which couldcause a fire hazard fromoverheated wires. If the wallsocket is loose, do not insertthe power plug.- There is a risk of electric shockor fi re.• Do not use a cord that showscracks or abrasion damagealong its length or at eitherend.• Do not bend the power cordexcessively or place heavyarticles on it.• Do not use aerosols near therefrigerator.- Aerosols used near therefrigerator may cause anexplosion or fire.• Do not install this appliance ina location where gas may leak.- This may result in an electricshock or fire.• The installation or anyservice of this applianceis recommended by aqualifi ed technician orservice company.- Failing to do so may resultin an electric shock, fire,explosion, problems with theproduct, or injury.• This refrigerator must beproperly installed and locatedin accordance with the manualbefore it is used.• Do not install the refrigerator ina damp place or place whereit may come in contact withwater.- Deteriorated insulation ofelectrical parts may cause anelectric shock or fire.• Connect the power plug inproper position with the cordhanging down.- If you connect the power plugupside down, wire can getcut off and a cause fire or anelectric shock.• Do not use a cord that showscracks or abrasion damagealong its length or at eitherend.• Make sure that the power plugis not squashed or damagedby the back of the refrigerator.• When moving the refrigerator,be careful not to roll over ordamage the power cord.- This constitutes a fire hazard.DA68-02916A (EN)-07.indd 05DA68-02916A (EN)-07.indd 05 2014. 5. 19. 2:062014. 5. 19. 2:06