2J. Bluetooth 127 Bluetooth3. Tap Scan for devices. (Your device will display a listof discovered in-range Bluetooth devices.)4. Tap a device from the list to initiate pairing.5. Enter the passkey or PIN code and tap OK.6. The external device will then have to also acceptthe connection and enter your device’s PIN code. Once successfully paired to an external device,appears within the Status area.To disconnect a paired device:Disconnecting a paired device breaks the connectionbetween the device and your Samsung Replenish™,but retains the knowledge of the pairing. At a later pointwhen you wish to reconnect the device, there is noneed to setup the connection information again.1. Verify your Bluetooth is active.2. From the Bluetooth settings page, touch and holdthe name of the previously paired device.3. Tap Unpair to confirm disconnection.Sending Contacts via BluetoothDepending on your paired devices’ settings andcapabilities, you may be able to send pictures,Contacts information, or other items using a Bluetoothconnection.Note: Due to different specifications and features of otherBluetooth-compatible devices, display and operationsmay be different, and functions such as transfer orexchange may not be possible with all Bluetooth-compatible devices.Note: Pairing between two Bluetooth devices is a one-timeprocess. Once a pairing has been created, the deviceswill continue to recognize their partnership andexchange information without having to re-enter apasscode again.Note: Disconnections are manually done but often occurautomatically if the paired device goes out of range ofyour Samsung Replenish™ or it is powered off.SPH-M580.book Page 127 Thursday, January 12, 2012 2:53 PM
