《24》Flash ( )/ Left button● Flash range (Unit : m)■ When the menu is displayed on the LCD monitor,pressing the LEFT button makes the cursor shift tothe left tab.■ When the menu is not displayed on the LCD monitor,the LEFT button operates as the FLASH( ) button.● Selecting the flash mode1. Rotate the MODE DIAL to select a RECORDING mode with the exception ofMOVIE CLIP mode.2. Press the Flash button until the desired flash mode indicator displays on theLCD monitor.3. A flash mode indicator will be displayed on the LCD monitor.Use the correct flash to suit the environment.WIDE TELE WIDE TELE WIDE TELE0.8~3.0 0.8~2.5 0.2~0.8 0.5~0.8 0.2~3.0 0.5 ~2.5Normal Macro Auto macroISOAUTO[Selecting the Auto flash]● Using the flash frequently will reduce the life of the battery.● Under normal operating conditions the charging time for the flash isnormally within 5 seconds. If the battery is weak, the charging time will belonger.● During the continuous shot, AEB, Motion capture, Interval shot and movieclip mode, the flash function will not operate.● Take photographs within the flash range.● The image quality is not guaranteed if the subject is too close or highlyreflective.● When taking an image in poorly lit conditions with the flash, there may be awhite speck in the captured image. The speck is caused by the reflecting ofthe flash light from the atmospheric dust. It is not camera malfuction.INFORMATION