《65》Setup menu[ Connecting an External Device (USB) ]■ You can select an external device to which you want to connect the camerausing the USB cable.● Sub menus- [Computer] : Select this if you want to connect thecamera to your PC. Refer to page 77for instructions on how to connect thecamera to your PC.- [Printer] : Select this if you want to connect thecamera to your printer.Refer to page 57 for instructions onhow to connect the camera to yourprinter.[ LCD brightness ]■ You can adjust the LCD brightness.● [LCD] sub menu : Dark, Normal, BrightSETUPAF LampSoundUSBLCDVideo OutBack: Set:OKComputerPrinterSETUPSoundUSBLCDVideo OutQuick ViewBack: Set:OKDarkNormalBright[ Selecting Video out type ]■ The Movie output signal from the camera can be NTSC or PAL.Your choice of output will be governed by the type of device (monitor or TV, etc.)to which the camera is connected. PAL mode can support only BDGHI.■ Connecting to an external monitorIn RECORDING/ PLAY mode, you can view thestored still images or movie clips by connecting thecamera to an external monitor via the AV cable.When the camera is connected to an externalmonitor, the LCD monitor will be turned offautomatically.SETUPUSBLCDVideo OutQuick ViewResetBack: Set:OKNTSCPALYellow - VideoWhite - sound