《55》DPOF DPOF : Standard1. Press the play mode button and press the menubutton.2. Press the LEFT/ RIGHT button and select the[DPOF] menu tab.3. Select the [Standard] menu by pressing the UP/DOWN button and press the RIGHT button.4. Select a desired sub menu by pressing the UP/DOWN button and press the OK button.[Select] : Selection window for an image to print isdisplayed.- Up/ Down/ Left/ Right : Select an image to print.- Zoom W/ T Button : Select the number ofprints.[All Pics] : Configure number of prints for allpictures except movie and voice files.- W/ T button : Select a number of prints[Cancel] : Cancel the print setup.5. Press the OK button to confirm the setting.If an image carries DPOF instructions, the DPOFindicator ( ) will show.■ This function allows you to embed printing quantity information on a storedimage.■DPOF(Digital Print Order Format) allows you to embed printing information onyour memory card’s MISC folder. Select the pictures to be printed and how manyprints to make.■The DPOF indicator will display on the LCD monitor when an image that hasDPOF information plays back. Images can then be printed on DPOF printers, orat an increasing number of photo labs.■This function is not available for Movie clips and Voice recording files.■When the wide angle image is printed as a wide angle print, 8% of the left andright side of the image may not be printed. Check that your printer can supportthe wide angle image when you print the image. When you print the image at aphoto lab, request that the image is printed as a wide angle image. (Some photolabs may not support the wide angle size print.)Set:OKW 0 Prints TDPOFStandardIndexSizeBack: Set:OKSelectAll PicsCancelSet:OKW 0 Prints T