English – 17ENGHow to use OSD MenuFor normal operation, you must select DC for aDC-type lens, and select VIDEO for a VIDEO-type lens.The LEVEL menu is used to adjust theoverall brightness, where “+” will increase thebrightness and “–” will decrease it.② If you set the BACKLIGHT option to BLC,you will see a menu where you can set theBLC area.you can set the desired BLC zone by definingthe size and location.ALCLENS DCLEVEL [00]----I----BACKLIGHT BLCAREA USER If you use an ordinary camera in a scenewith an intensive backlight, the object will bedisplayed dark on the monitor affected by thebacklight. To solve this problem, you can usethe BLC(Back Light Compensation) functionto improve the sharpness of the image insuch a high contrast scene.③ If you set the BACKLIGHT option to WDR, you willsee a menu where you can set the WDR options.You can adjust the shutter speed in WDR LEVELand the brightness in WEIGHT.You can also select any of OUTDOOR, andINDOOR in WHITE BAL.ALCLENS DCLEVEL [ 00]----I----BACKLIGHT WDRWEIGHT MIDWDR LEVEL [ 0]----I----WHITE BAL INDOOR WDR(Wide Dynamic Range) extends the gainrange of the screen that is mostly useful if youtake a simultaneous picture of both indoor andoutside of the window.Namely, it improves the sharpness of thepicture in outdoor scenery as well as indoor.Note :If you use the VPS (Virtual Progressive Scan) function,the CCD reads differently so you can not use WDRsimultaneously.If you set VPS to ON, WDR will be automatically set toOFF.ELC (Electronic Light Control)① If you press the SETUP switch when the ELCsubmenu is selected, the corresponding screenappears. You can make the ELC (Electronic LightControl) function active or not.ELCLEVEL [00]----I----BACKLIGHT OFF ② In similar to ALC setting, you can specify theBLC area.ELCLEVEL [00]----I----BACKLIGHT BLCAREA USER –•
