Samsung SCC-B2335P User Manual

Also see for SCC-B2335 SCC-B2035P: User manual User manual

Contents

English – 21ENGHow to use OSD MenuEXTThis enables an auto switch between DAY andNIGHT mode using the interface with the externalsensor.WHITE BAL [DAY/NIGHT]If you want to adjust the color scheme, use theWHITE BALANCE function.DAYIn DAY mode, you can set the color values ofRED and BLUE. The screen will be displayed incolors according to your settings.WHITE BALDAY/NIGHT DAYMODE AWCRED [00]----I----BLUE [00]----I----R-GAIN [0248]B-GAIN [0247] Note :You can set the values of R-GAIN and B-GAIN only inAWC mode.NIGHTUse the NIGHT mode if you want to set the whitebalance differently according to the ambientluminance.If the NIGHT mode is set to OFF, the whitebalance will always operate as set in DAY mode;if not to OFF, the camera will switch to as set inDAY/NIGHT mode according to the brightness.In NIGHT mode, you can set the values of RED,BLUE and BRIGHTNESS. The screen will bedisplayed in colors according to your settings.•❖•–•WHITE BALDAY/NIGHT NIGHTBRIGHTNESS MIDMODE AWCRED [00]----I----BLUE [00]----I----R-GAIN [0248]B-GAIN [0247] Note :You can set the values of R-GAIN and B-GAIN only inAWC mode.If AGC is set to OFF or FIX, you can not access theNIGHT menu.For adjusting the white balance, the following5 modes are provided:ATW1(Auto Tracing White Balance mode1): The camera can automatically adjust thecolor temperature in real time, according tothe ambient conditions. The color temperatureranges from approx. 2500K to 9300K.ATW2: The color temperature ranges fromapprox. 2,000K to 10,000K.AWC ( Auto White Balance Control): If youpress the SETUP switch in the appropriate itemposition, Auto White Balance will perform once.3200K : Set color temperature to 3200K5600K : Set color temperature to 5600KRED : Adjusts the strength of the red color.BLUE : Adjusts the strength of the blue color.R-GAIN/B-GAIN : Enables you to set the currentcolor temperature manually.BRIGHTNESS : Select a brightness level inswitching from setting in DAY mode to setting inNIGHT mode.–––•••••––––