Samsung SCC-C4205P Owner's Instructions Manual

Also see for SCC-C4205: Owner's instructions

30E29❖ HOME RETURN automatically returns to the HOMEposition should there is no key input for a certain time.The HOME position is set to PRESET 0 if it is saved orOff if not.HOME RETURN Time SetupOFF 1MIN 2MIN 3~60MIN 2 HOUR 3~12 HOURPRESET NO. 0POSITION SET ...PRESET ID OFFEXIT QUIT(PRESET MAP)0 H 1 2 3 45 6 7 8 910 11 12 13 1415 16 17 18 1920 21 22 23 2425 26 27 28 2930 31 RETHOME RETURN OFFEXIT QUIT❙ PRESETSelect the PRESET menu and press [ENTER] and thePRESET MAP submenu screen will appear.Select the PRESET number and press [ENTER] and theabove screen will appear.✔ POSITION SET : Memorizes the position of ZOOM orFOCUS.✔ PRESET ID : Designates the ID on the basis of thePRESET position as the CAMERA ID.Press theENTERbutton.(RS-485)PROTOCOL SAMSUNGBAUD RATE 9600ADDRESS 0RET✔ DETAIL : Controls the horizontal or vertical distinction.✔ V-SYNC : INT shall be selected to use internalsynchronization. LINE... is used to synchronize severalcamera phases for the multi camera operation by using anexternal signal(AC signal). As there may be a slightdeviation between sets, adjusts PHASE to overcome thishandicap. When you use AC power source, V-SYNC isavailable. Select LINE... and press [ENTER] and thePHASE control submenu will appear. The PHASE controlranges from -106H to +106H as for NTSC and from -138Hto +138H as for PAL.Press theENTERbutton.❖ In case of DC power source, the V-SYNC menu ismarked --- so that setup is unavailable.✔ RS-485 : Sets up RS-485 Communication Protocol, Address,and Baud Rate.(SPECIAL)LANGUAGE ENGLISHCTRL TYPE APOSI/NEGA +D-ZOOM 1DIS OFFDIGITAL ZOOM OFFREVERSE OFFRS-485 OFFDETAIL (1)-I--V-SYNC INTRET(SPECIAL)LANGUAGE ENGLISHCTRL TYPE APOSI/NEGA +D-ZOOM 1DIS OFFDIGITAL ZOOM OFFREVERSE OFFRS-485 OFFDETAIL (1)-I--V-SYNC INTRET(LINE LOCK)PHASE (000) ----I----RETPress theENTERbutton.