_ setupsetupCAmeRA seTYou can configure the general settings of the camera module.For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 18)Select <MAIN MENU> - <CAMERA SET>.The Camera Setup menu appears.Change the settings as necessary, or selectan item to check.CAmeRA IdProvide the ID and location for a camera that displays on the screen.For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 18)Select <CAMERA SET> - <CAMERA ID>.Use the joystick to select a desired character,then press [ENTER].In the lower input box of the screen, theselected character will be entered.You can enter up to 54 characters includingalphabets, numbers and special characters.LOCATION : Specify the display positionof the camera ID.When done, press [ENTER].The camera ID will be displayed in the specified position.1.2.1.2.3. CAMERA SET CAMERA ID OFFIRIS ALCMOTION (F.FAST) ---DNR MIDSHUTTER (OFF) ---SENS-UP AUTO X4FLICKERLESS OFFXDR MIDCAMERA IDABCDEFGHIJKLMNOPQRSTUVWXYZO123456789 : ?_+()/SP SP LOCATION- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -