English _EnglishIf any unusual smells or smoke come from the unit, stop using the product. In suchcase, immediately disconnect the power source and contact the service center.Continued use in such a condition may cause fire or electric shock.If this product fails to operate normally, contact the nearest service center. Neverdisassemble or modify this product in any way. (SAMSUNG is not liable forproblems caused by unauthorized modifications or attempted repair.)When cleaning, do not spray water directly onto parts of the product. Doing so maycause fire or electric shockDo not expose the product to the direct airflow from an air conditioner.Otherwise, it may cause moisture condensation inside the Clear Dome due totemperature difference between internal and external of the dome camera.If you install this product in a low-temp area such as inside a cold store, you mustseal up the wiring pipe with silicon, so that the external air can not flow inside thehousing. Otherwise, external high, humid air may flow inside the housing, poolingmoisture or vapor inside the product due to a difference between internal andexternal temperature.CAUTIONDo not drop objects on the product or apply strong blows to it. Keep away from alocation subject to excessive vibration or magnetic interference.Do not install in a location subject to high temperature (over 50°C), low temperature(below -10°C), or high humidity. Doing so may cause fire or electric shock.If you want to relocate the already installed product, be sure to turn off the powerand then move or reinstall it.Remove the power plug from the outlet when there is a lighting storm. Neglectingto do so may cause fire or damage to the product.Keep out of direct sunlight and heat radiation sources. It may cause fire.Install it in a place with good ventilation.Avoid aiming the camera directly towards extremely bright objects such as sun, asthis may damage the CCD image sensor.Apparatus shall not be exposed to dripping or splashing and no objects filled withliquids, such as vases, shall be placed on the apparatus.The Mains plug is used as a disconnect device and shall stay readily operable atany time.When using the camera outdoors, moisture may occur inside the camera dueto temperature difference between indoors and outdoors. For this reason, it isrecommended to install the camera indoors. For outdoor use, use the camera withbuilt-in fan and heater.8.9.10.11.12.1.2.3.4.5.6.7.8.9.10.