Samsung SCH-I920 User Manual

Also see for Omnia II: User manual

Contents

Samsung SCH-I920 User Manual Manual pdf 139 page image

134– Tap New Outgoing Port to choose a device and set up a newoutgoing port.• Dial Up Network Terminal: No configurable settings.• Basic Printing: No configurable settings.• File Transfer: Tap Options for these settings:– Tap Enable to write to enable/disable writing to your device.– Tap Shared Folder to choose a location on your device for sharing.• Object Push: Tap Options for these settings:– Tap Enable to receive all Incoming to enable/disable automaticreceiving for incoming beams.– Tap Shared Folder to choose a location on your device for sharing.• Human Interface Device: No configurable settings.• Phonebook Access: No configurable settings.9. Tap Menu ➔ Device Info for settings about your device:• Tap Device Name to modify your device’s name, to be using duringpairing.• View the MAC address, which is needed for some pairings.• Enable visibility to other devices to put your device in discoverablemode, visible to other searching Bluetooth devices.• If in discoverable mode, tap Turn off Visible Mode to set a length oftime to remain discoverable. Choose from Never, After 1 Minute,After 5 Minutes, or After 10 Minutes.Note: The Device Name that appears on the above screen can also bechanged via the Owner Information Settings. For more information, see“Owner Information” on page 95.Bluetooth BondsA bond is a relationship that you create between your Omnia IIand another Bluetooth-enabled device to exchange information ina secure manner. Creating a bond involves entering the samePasskey on the two devices sharing a bond.Bonds are created only once between devices. Once a bond iscreated between devices, the devices do not have to bediscoverable to exchange information; however, each devicemust have its Bluetooth radio on.Creating Bluetooth BondsNote: Make sure that the two devices are within range of one another andthat Bluetooth discoverable mode is enabled on both devices.1. Press the Main Menu key , Main Menu 2 ➔Bluetooth .– or –Press the Main Menu key , then Settings ➔Basic Settings tab ➔ Bluetooth Settings.2. Turn on Bluetooth by tapping the blue device icon.