Samsung SCH-I920 User Manual

Also see for Omnia II: User manual

Contents

Samsung SCH-I920 User Manual Manual pdf 148 page image

Changing Your Settings 143• Network Selection: Set the roaming option. Choose Home Only torestrict the phone to your service provider’s home network, orAutomatic to allow the phone to roam to other partnered networks tomaintain coverage.• DTMF Keypad Tone: Select Long Tones or Short Tones for the lengthof dialing tones played when tapping dialer keys during a phone call.Bluetooth Settings Press the Main Menu key , then Settings ➔ BasicSettings tab ➔ Bluetooth Settings.• Tap the phone icon to turn on Bluetooth.• Tap the Search soft key to search for Bluetooth devices.• Tap the Menu soft key to access the following options:– Ms Settings: Access Microsoft Bluetooth settings.– Delete: Deletes a Bluetooth device from your list.– Disconnect: Disconnects from the current Bluetooth connection.– Options: Select the type of Bluetooth device(s) to detect whensearching.– Device Service: Set the device partnership service options forBluetooth pairings.– Device Info: Tap Device Name field to edit the Device Name, which isvisible to other Bluetooth devices. View the MAC ID, which is used bysome Bluetooth devices. Disable or enable Visible Mode for yourdevice, and choose the length of time your device is visible.– Exit: Close Bluetooth Settings.Wi-Fi Settings Press the Main Menu key , then Settings ➔ BasicSettings tab ➔ Wi-Fi Settings.• Tap the phone icon to turn on Wi-Fi.• Tap the Search soft key to search for Wi-Fi access points.• Tap the Menu soft key for these settings:– Ms Settings: Select Microsoft Wi-Fi settings.– Add New: Enter a new Wi-Fi access point.– Disconnect: Select and disconnect from a Wi-Fi access point.– Delete: Delete a Wi-Fi access point.– Certificates: Shows the certificate for a connecte Wi-Fi site.– Configuration: Select Wi-Fi connection and IP Settings.– Exit: Closes Wi-Fi settings.Security Settings Press the Main Menu key , then Settings ➔ BasicSettings ➔ Security Settings.Password Lock: Enable or disable a prompt for a password towake up the device, and set the password and display options.• Enter a time interval for the prompt, from various values from 0minutes to 24 hours.• Choose a Password type, from Simple PIN or Strong alphanumeric.• Enter a password, and confirm by entering the password again. andpassword type.