41• If VoiceSignal does not recognize the name you said, a choice list ofup to three names appears in the display, and VoiceSignal promptsyou with “Did you say?” followed by the first name on the list.4. Say “Yes” to confirm the name or “No” to hear the nextname, or use the keypad to select the correct name fromthe list. (For more information, refer to “Choice Lists” onpage 104)• To say the name again, press Repeat.• To exit VoiceSignal without dialing, press Settings and press Exit.5. The contact information for the name you selected appearsin the display.• To dial the default number associated with the name, press .• To remove this entry from your Contacts list, press the Erase softkey.• To add or change information for this entry, press EDIT ( ).• To access the following options, press the Options soft key.– Send Message — Create and send a Text/Picture/Video message tothe selected Contact.– Call — Dial the number associated with the Contact name.– Send Name Card Via Bluetooth — Send the select Contact’sinformation to another Bluetooth device.Quick Search MethodFor information on enabling Quick Search, see “Quick Search” onpage 128.1. In Standby mode and with Quick Search enabled, press thefirst few numeric keys that correspond to the letters of theContact’s name.Example: To search for “Sally” you would enter 725.2. Press the Up navigation key. A list of Contact names thatbegin with letters corresponding to the number keys youpressed appears in the display.3. Highlight the searched for Contact.• To call the Contact, press .• To view the Contact, press .Adding a New Contacts EntryYou can use either of two methods to add an entirely new entry toContacts.Dial Method1. Using the keypad, enter the number you wish to add toyour Contacts.
