36Note: Phone contacts are always the primary contact for linking. You can linkimported contacts to a Phone contact, but the Phone contact willalways display; the imported contact will show as the linked contact.Joining contacts1. From the Home screen, touch Phone ➔ Contacts.2. Touch a Phone contact to display its information.3. Press Menu, then touch Edit contact.4. Press Menu, then touch Join.5. Touch an imported contact record to link it to the Phonecontact.Unjoining contacts1. From the Home screen, touch Phone ➔ Contacts.2. Touch a joined contact to display its information.3. Press Menu, then touch Edit contact.4. Press Menu, then touch Separate. You are promptedto verify the separation.5. Touch OK.Sending a Namecard (vCard)You can send a contact namecard as a vCards via Bluetooth toother Bluetooth devices, or via Gmail as an attachment.Important!: Not all Bluetooth devices will accept contacts, and not all devicessupport transfers of multiple contacts. Check the target device’sdocumentation.1. From the Home screen, touch Phone ➔ Contacts.2. Touch a contact to display its information.3. Press Menu, then touch Share.4. At the prompt, choose a sending method, then follow theprompts to send the namecard:• Bluetooth: For more information about sending via Bluetooth, see“Bluetooth” on page 65• Gmail: For more information about sending Gmail, see“Composing and Sending Gmail” on page 45• Email: For more information about sending Gmail, see“Composing and Sending Email” on page 47Tip: You can also send Contact namecards in Email messages, after you addan Email account. (For more information, refer to “Accounts & sync” onpage 92.)