Call Functions 30Voice Commands5. Use the navigation key to select one of the following:• TTY Full• TTY + Talk (VCO)• TTY + Hear (HCO)• TTY Off6. Press to make your selection. The TTY Mode Set screen displays.Voice CommandsVoiceSignal™ is advanced speech recognition software that can be used to activatevoice commands for a wide-variety of functions on your phone. VoiceSignal softwareautomatically voice activates all contacts for voice dialing, message addressing andfinding contacts. No pre-recording or training is needed. Speak phone numbersnaturally to dial, and use voice commands to navigate phone menus. Names shouldbe spoken exactly as they are spelled in the contact list.Voice Commands SettingsYou can adjust the settings and preferences for Voice Commands by pressing andholding the key to launch to Voice Commands menu, and pressing theSettings right soft key. Using this menu, you can change the following VoiceCommand features:• Choice List Behavior• Speech Recognition Sensitivity• Digit Dial Adaptation• VoiceSignal Sound Settings• VoiceMode Adaptation and TutorialTo access the Voice Commands Settings menu, follow these steps:1. From the main screen, press MENU. Use the navigation key tohighlight SETTINGS & TOOLS and press .2. Press Phone Settings, then Voice Commands, andVoice Settings.3. Use the navigation keys to select the setting you want to change. Thefollowing options are available:• Choice Lists: If VoiceSignal is not absolutely confident that it has correctly identifieda name or number, it can display a choice list of up to three possibilities, andprompt you to confirm the correct one. You can control when choice lists appear bychanging the Choice Lists setting to the following:OKOKOK
