Call Functions 36Voice CommandsSend MessageSend lets you begin composing any of the following types of messagesby simply speaking the type of message and digits or a Contact name into thephone:• Text• Picture• Video1. From the main screen, press and hold the key.2. A list of commands appears in the display and the audio prompt “Pleasesay a command” plays through the speakerphone.3. Say “Send” (for a Text, Picture, or Video message) or “Send” and amessage type (“Text”, “Picture”, or “Video”) as a single command. “Pleasesay the name or number” plays through the speakerphone.4. Say a name exactly as it is displayed in your Contacts list, first namefollowed by last name; or say an area code and number into themicrophone, clearly and naturally. The number that you said is repeatedthrough the speakerphone.5. The CREATE MESSAGE screen appropriate to the message type you saidinto the microphone appears in the display with the name or number yousaid entered in an address field.6. Complete and send your message. See “Creating and Sending TextMessages” on page 67 for more information.Name LookupTo perform a name lookup, you’ll need to have some entries in your Contacts list.1. From the main screen, press and hold the key.2. A list of commands appears in the display and the audio prompt “Pleasesay a command” plays through the speakerphone.3. In a single command, say “Lookup” followed by the name of a contactentry at a distance of 3-12 inches from the microphone. For example, youcould say “Lookup John Smith."4. If you only say “Lookup”, “Please say the name” plays through thespeakerphone.To use Lookup, say the name of the contact that you want to look up.
