Settings 133Change LockThe default lock code is the last four digits of your phonenumber. Change Lock allows you to change this code to alock code of your preference.1. In standby mode, press the left soft key ( ) Menu,then press (Settings), (Security). You’reprompted to enter the lock code.2. Press (Change Lock). You’re prompted to enterthe new lock code.3. Enter the new lock code. You’re prompted to confirm thenew lock code.4. Enter the new lock code again for confirmation.5. A message appears in the display confirming that yourlock code has been changed.Your phone does not allow you to view the lock code forobvious security reasons. If you change the lock code, besure to write down or memorize the new code.Emergency #Emergency number 911 is hard-coded into your phone. Youcan dial this number any time, even when the phone islocked or restricted. If you call 911 an audible tone is heardand an emergency prompt appears in the display for theduration of the call.You can store up to three emergency numbers to your phone.Each number can be up to 32 digits in length. All emergencynumbers can be dialed any time, even when your phone islocked or restricted.VerizonA790 ver.2.book Page 133 Monday, March 22, 2004 11:20 AM
