Voice SVC 103Voice SVC OptionsVoice SVC OptionsYour SCH-a870 includes VoiceSignal, state-of-the-art voice recognition software thatlets you use your voice to dial numbers, access your Contacts list, and open Tools. Toaccess your phone’s voice recognition, do the following:1. In standby mode, press the MENU key ( ), then press for VoiceSVC. The following options appear in the display:• Voice Commands — Lets you place calls, access your Contacts List, reviewyour appointments, and more by speaking commands into your phone. Also see"Voice Dialing" on page 25 and "Voice Method" on page 51 for moreinformation.• Voice Settings — Lets you tailor VoiceSignal to better respond to your voiceand your phone use preferences.See "Digit Dialing" on page 105 for more information.2. Use the navigation keys to highlight the desired sub-menu, then press thekey.Voice CommandsTo access the Voice Commands menu, do one of the following:• In standby mode, press and hold the key.“Say a Command” appears in the display and is pronounced through theearpiece, followed by a list of available commands.• In standby mode, press the MENU key ( ), then press (for Voice SVC) andfor Voice Commands.Note: You can also set your phone to start VoiceSignal when you open the phone. See "Voice Launch" onpage 107 for more information.The following voice commands appear in the display:• Call — Lets you dial the phone by saying any name stored in your contact list,without ever having to record, or “train” that name. VoiceSignal automaticallyvoice-activates all your contacts, even if you have hundreds of them stored onyour phone. You can also dial any telephone number, even if it is not stored in yourcontact list, by saying the digits in the number. (See "Voice Dialing" on page 25 formore information.)• Send Text — Lets you access Create Text Message.• Send Picture — Lets you access Create Picture Message.• Lookup — Lets you find a Contact by name and review the Contact’s information.mnomno@
