106Adapt DigitsTo adapt digit dialing, do the following:1. In standby mode, press the MENU key ( ), then press (for VoiceSVC), (for Voice Settings), and for Digit Dialing. Thefollowing options appear in the display:• Adapt Digits• Reset Digits2. Use the navigation keys to highlight Adapt Digits, then press the key.Your phone displays text describing the Adapt Digits process.3. Press the key. Your phone displays the first digit sequence and“Please say” plays through the speaker followed by the four digitsappearing in the display.4. Wait for the beep and say the digits using your normal tone of voice. After amoment, the phone plays back the recording and prompts “Did therecording sound ok?”• If the recording was good, say “Yes.”• If you need to re-record, say “No.”If you say “No,” the phone prompts you to pronounce the digits again. Waitfor the beep and then say the digits.Repeat this step until you’re satisfied with the recording.5. After confirming that the recording sounds “ok”, continue the recordingprocess with the next set of digits.6. After 10 sets of digits, the phone asks whether you want to do moreadaptation. Answer “Yes.”7. Repeat steps 4 and 5 for another 10 sets of digits. After the second groupof 10 sets of digits, “Adaptation complete” plays through the speaker andyou are returned to the Digit Dialing menu.Reset DigitsTo reset digit dialing to factory default settings, do the following:1. In standby mode, press the MENU key ( ), then press (for VoiceSVC), (for Voice Settings), and for Digit Dialing. Thefollowing options appear in the display:• Adapt Digits• Reset Digitsmnoabc defmnoabc def
