Voice SVC 105Voice Settings3. Press the key or the OK (left) soft key ( ) to accept the new setting.Press the key to discard the new setting and return to the VoiceSettings menu.Sensitivity1. In standby mode, press the MENU key ( ), then press (for VoiceSVC), (for Voice Settings), and for Sensitivity.2. Use the Up and Down navigation keys to adjust the selected Sensitivitysetting incrementally between Reject More spoken commands or namesand Reject Less spoken commands or names.3. Press the key or the OK (left) soft key ( ) to accept the new setting.Press the key to discard the new setting and return to the VoiceSetting menu.Digit DialingIf you regularly have trouble with VoiceSignal not recognize the numbers you say, tryadapting digit dialing to your voice. Adapting can improve the accuracy of digitrecognition, especially for people with strong regional accents.Note: After you adapt Digit Dial, your phone is customized to your voice, and your voice only. Others will notbe able to use it unless they reset the phone to factory defaults.Adaptation involves recording several sequences of four digits each. The recordingprocess takes about a minute.Tips for Adapting Digit Dialing• Use Adapt Digits in a quiet place.• Make sure you wait for the beep before starting to speak.• Speak clearly, and say each digit distinctly.• If you make a mistake while recording a sequence of digits, or if there is anunexpected noise that spoils the recording, re-record that sequence.• Only adapt digits if you are regularly having problems with digit dialing. Once youadapt, digit dialing will not work as well for other people using your phone. (Youcan always reset digit adaptation to its original state, as described below.)CLRmnoabc abcCLR
