Settings 146SettingsConnections SettingsBeamA Beam connection can be established by:1. From the Today screen, tap the right soft key function Main Menu > Settings> All Settings > Connections tab > Beam.2. Tap the box to place a check mark to receive all incoming beams, if desired.3. Tap to save your changes and return to the previous screen.BluetoothBluetooth is a short-range wireless communications technology capable of exchanginginformation over a distance of about 30 feet without requiring a physical connection.Unlike infrared, you don't need to line up the devices to beam information with Bluetooth. Ifthe devices are within a range of one another, you can exchange information betweenthem, even if they are located in different rooms.• For more information, refer to "Bluetooth and Wi-Fi Services" on page 110.ConnectionsConnections allows you to set your network connection settings.1. From the Today screen, tap the right soft key function Main Menu > Settings> All Settings > Connections tab > Connections.2. Make any changes, if necessary, in the Tasks or Advanced tabs.3. Tap to save your changes and return to the previous screen.Domain EnrollYou can enroll into a domain to connect your device with company resources. You willneed the enrollment password provided by your system administrator.1. From the Today screen, tap the right soft key function Main Menu >Settings > All Settings > Connections tab > Domain Enroll to open theDomain Enrollment screen.2. Tap Enroll.3. Tap Next. Read the on-screen instructions to enroll.USB Connection ModeUSB Connection Mode allows you to select a function for your device when using a USBconnection.1. From the Today screen, tap the right soft key function Main Menu > Settings> All Settings > Connections tab > USB Connection Mode.2. Tap a USB function: ActiveSync or Mass storage.
