792. Select the desired setting.Auto RetryAuto Retry automatically re-dials a number if there is no answeror the dialed party is busy. Depending upon your location, thenumber of times your phone redials a number may vary.1. From the Settings menu, select Call Settings ➔ Auto Retry.The following options appear in the display:• Off• Every 10 Seconds• Every 30 Seconds• Every 60 Seconds2. Select the desired setting.TTY ModeYour phone is fully Teletypewriter (TTY)/TelecommunicationDevice for the Deaf (TDD) compatible. You connect TTY/TDDequipment to the headset connector on the right side your phone.TTY Mode must be enabled (TTY Full selected) before you canuse your phone with TTY/TDD equipment.1. From the Settings menu, select Call Settings ➔ TTY Mode.A message pops-up warning of possible headset and non-TTY accessory performance impairment when in TTY modeand prompting you to confirm that you want to enable/disable TTY Mode.• Press Yes to change the TTY Mode setting.• Press No to keep the current TTY Mode setting.If you press Yes, the following settings appear in thedisplay:• TTY Full — Enables TTY mode while letting you hear and speakwith the other party.• TTY + Talk — Enables TTY mode while letting you speak with theother party.• TTY + Hear — Enables TTY mode while letting you hear the otherparty.• TTY Off — Disables TTY mode.Note: The TTY Mode option has no effect on the phone’s earpiece,microphone, or speaker. When you select TTY Full, all currentlyenabled sound functions remain enabled.2. Select the desired setting. You’re returned to the previousmenu and the TTY icon ( ) appears in the top of thedisplay.