G ENERAL FAX FUNCTIONS2.66 The number is dialed and then the machine begins sendingthe fax when the remote fax machine is ready.NOTE: When you want to cancel the fax job, press Stop/Clear atany time while sending the fax.Sending a Fax Manually1 Load the document(s) face up into the ADF.ORPlace a single document face down on the document glass.For details about loading a document, see page 2.2.2 Adjust the document resolution to suit your fax needs (seepage 2.4).If you need to change the contrast, see page 1.13.3 Press On Hook Dial. You hear a dial tone.4 Enter the remote fax machine’s fax number using thenumber keypad.5 When you hear a high-pitched fax signal from the remote faxmachine, press Start Copy/Fax.NOTE: When you want to cancel the fax job, press Stop/Clear atany time while sending the fax.Confirming TransmissionWhen the last page of your document has been sent successfully,the machine beeps and returns to Standby Mode.If something goes wrong while sending your fax, an errormessage appears on the display. For a listing of error messagesand their meanings, see the MFP User’s Guide.If you receive an error message, press Stop/Clear to clear themessage and try to send the document again.You can set your machine to print a confirmation reportautomatically each time sending a fax is completed. For furtherdetails, see the MSG Confirm item in “Available Fax SetupOptions” on page 1.13.
