PAPER HANDLING3.4• Make sure that there is no exposed adhesive materialbetween labels. Exposed areas can cause labels to peel offduring printing, which can cause paper jams. Exposedadhesive can also cause damage to machine components.• Do not load a sheet of labels through the machine more thanonce. The adhesive backing is designed for one pass throughthe machine.• Do not use labels that are separating from the backing sheetor are wrinkled, bubbled, or otherwise damaged.NOTE: Do not use Carbonless paper and Tracing paper. Theycould make smell of chemicals and damage your printer.Selecting an Output LocationThe machine has two output locations; the rear output slot (faceup) and the front output tray (face down).To use the front output tray, make sure that the rear cover isclosed. To use the rear output slot, open the cover.NOTES:• If paper coming out of the front output tray has problems, suchas excessive curl, try printing to the rear output slot.• To avoid paper jams, do not open or close the rear cover whilethe machine is printing.Front outputtrayRear output slot
