Care and Maintenance7-11Chapter 7AdjustShading The shading is adjusted at the factory. If, however, you dropand damage your machine while moving, we recommend youadjust shading for optimized lightness.To adjust Shading, do as follows:1 Load a plain WHITE sheet of paper (no writingor graphics) into the loading slot.•BE CAREFUL !Printing quality may be unexpectedly worse if you donot use a plain WHITE paper for the adjustment.2 Press Setup and find ‘MAINTENANCE’ bypressing ➛ or ❿.3 Press Start/Enter and scroll to ‘ADJUSTSHADING’ by pressing ➛ or ❿.4 Press Start/Enter.The machine starts to scan the document toadjust Shading, and it displays ‘SHADING...’. Ifthere’s no document loaded, the display promptsyou ‘LOAD WHITE DOC.’ with a beep. Insert aWHITE paper and press Start/Enter to start it.After feeding the document, it returns to StandbyMode.
