T HEA NSWERINGMACHINE4.3THEA NSWERINGMACHINETHEA NSWERINGMACHINETHE ANSWERINGMACHINETHEA NSWERINGM ACHINET HEA NSWERINGMACHINETHEA NSWERINGM ACHINETHEA NSWERINGMACHINEPlaying back messagesWhen there are messages waiting to be heard, the TAM button flashes and the display shows that you have newmessages, for example, New: 1 ICM: 3. (‘New: 1’ indicates there’s one new message, and ‘ ICM: 3 ’ says that there arethree incoming messages recorded in total.)Playing back newly received caller messagesSimply press Play/Record.• The machine briefly displays recorded time then starts to play the message. This procedure is repeated for all NEWmessages.• When the display reads 50s(01/03), ‘01’ is the number of the caller message currently being played and ‘03’ is the totalnumber of new caller messages in memory. ‘50s’ is the play back time for the message currently playing. This timecounts down as the message plays back.Playing back all messagesPress and hold Play/Record until you hear a beep.• All the messages are played back. The display briefly shows recorded time of each message, then plays ALL themessages recorded.• When the display reads 50s(01/03), ‘01’ is the number of the caller message currently being played and ‘03’ is the totalnumber of caller messages in memory. ‘50s’ is the play back time for the message currently playing. This time countsdown as the message plays back.• Press Stop/Clear or Play/Record to stop before the last message. While the message is playing back, the displayshows a variety of useful information.Skipping backward or forwardTo skip backwardPress |<<(1) while listening to the message.• If you press |<<(1) while playing back the message, the machine will replay it.• The machine skips back to the previous message and plays it if you press |<<(1) twice.To skip forwardPress >>|(3) while listening to a message.• The machine skips forward to the next message and plays it.• If you press >>|(3) while playing the last message, the machine beeps and returns to the Standby Mode.