S ETUP ANDC OPYING1.5S ETUP ANDCOPYINGSETUP ANDC OPYINGS ETUP ANDC OPYINGS ETUP ANDCOPYINGS ETUP ANDC OPYINGSETUP ANDC OPYINGSETUP ANDC OPYINGLoading paperTo receive faxes or make copies, you should load the paper in the ASF3 . You can load approximately 50 sheetsof paper. Before loading the paper, see if the paper size is set correctly in the System Setup.For more information, see "Paper Size" on page 6.10.1 Put in the Paper Support.2 Pull the Dust Cover toward you.3 Fan the papers and insert them into the ASFwith the print side face up.4 Squeeze the Paper Guide, and move it to theright to match the width of the paper.5 When completed, replace the Dust Cover toits original position.Paper type and sizesSatisfactory print and receive quality can be obtained with many types of plain paper. Since the quality of plainpaper varies widely, test the print quality before buying large quantities of paper. Your machine uses a variety ofpapers including:• Xerographic paper• Bond paper• Dual-purpose paperBecause all paper varies in physical characteristics, you can receive mixed results from different packages ofpaper even though the packages contain the same type of paper. If you encounter undesirable results, try theother side of the paper, a different type, or another package of the same kind of paper.DO NOT use the following types of paper with your machine:• Continuous form feed paper• Synthetic paper• Thermal paper• Multi-sheet forms and documents• Chemically treated paper• Papers with raised, embossed letteringThe following print media can be used with your machine:3. Automatic Sheet Feeder.Paper size Dimensions Paper weightA4 210 mm x 297 mm60 ~ 90 g/m2Letter 216 mm x 279 mmLegal 216 mm x 356 mmPaper GuidePaper SupportDust Cover