Samsung SF-370 Series User Manual

Contents

8.8Memory Full Memory has become full while receiving a fax or short message. Fax/TelephoneMemory FullPress OK to continueMemory has become full while scanning a document. Press OKto send or copy the scanned pages only. To cancel the job pressStop/Clear and try again when memory becomes available, orsplit the new document into smaller parts.Fax/CopyMemory ReceivedWhen it toggles with:Ink Low. Install new ink cartridgeLoad paper and press OKInstall ink cartridgeThe machine has data stored in memory. Depending on themessage do as follows:Replace the print cartridge with new one.Load the paper, and press OK. There might be a jam. Clear thejam as described in "Paper jams during printing" on page 8.12.Install a print cartridge.FaxNo answer from remote fax The other machine has not answered after all your attempts tosend a fax.FaxNo CID Number The machine could not detect the CID (Caller ID) number. TelephoneNo Dial Number There is no number in the redial memory, which is successfullydialled up to now.TelephoneNo Message There is no message to play or erase. There is no received shortmessage to read or print.TAM(SF-375TP only)No New Message There is no new caller message. There is no received shortmessage.TAM(SF-375TP only)Not available while reprinting fax The machine can not receive a new fax while printing the storedfaxes.FaxNot Found The number you are searching does not exist in memory. TelephoneNumber already registered The number you are trying to register already exists in thephonebook or junk fax list.TelephoneNumber Not Assigned There is no number assigned to the One-Touch or two-digitSpeed number.TelephoneOK Again The number that you entered is outcide the range of speed dialnumber, i.e. more than 100.Fax/TelephonePoll Code Error The remote user entered wrong poll code. FaxPoll job exists already You have programmed a polling send. Cancel scheduled job andtry again.FaxPolling ErrorCheck remote siteThe machine you want to poll is not ready to answer your poll.The person you are polling should have loaded their fax machinewith a document and be in send poll state.FaxProcessing Job You attempt to enter My Favorites, while sending My Favoritesdocument or printing My Favorites document.FaxReceiving Error.Ask sender to try again.There is an error while receiving a fax. FaxRecord TAM OGM To select TAM (Telephone Answering Machine) receive mode,you should record OGM Out Going Message) prior to pressingthe Answer button.TAM(SF-375TP only)Remove jammed document The document you are sending has jammed in the feeder. Toclear the document jam, see "Document jams duringtransmission" on page 8.12.You tried to copy or fax a document which is longer than390 mm.DocumentDisplay Status/Solution Related to: