3.3Stand-alone Fax6. When setting is done, press Start/Enter to save the setting.You can exit from setup mode at any time by pressing Stop. Themachine returns to Standby mode without saving the setting youhave already changed.Selectable OptionsThese instructions assume you have followed the steps on page 3.2under ‘Setting an Option’ and the machine is prompting you to changeone of the options listed here.• LANGUAGE — You can select the display language. The availablelanguages are ENGLISH, GERMAN, FRENCH, ITALIAN, SPANISH,PORTUGUESE and DUTCH.• SEND FROM MEMORY—Enables all transmission documents to beautomatically scanned into the memory before transmission.Select ON to enable.Select OFF to disable.• SENDING CONFIRM — A confirmation report shows whether the lasttransmission was successful or not, how many pages were sent, etc.Select ERROR to print only when an error occurs and the transmissionwas not successful.Select ON to print a confirmation report automatically each time yousend a fax.Select OFF to turn off.• FAX PAPER SIZE — Select the paper size you will use for recording.LETTER, A4 and LEGAL sizes are available.Note: If you set the Auto Reduction menu option, or turned PaperSave mode on, your machine will determine the reduction rateaccording to this setting.
