3.22 Stand-alone Fax3. The display asks you to enter a name. For information on how toenter names, see page 3.19.Or, if you do not want to assign a name, skip this step.4. Press Start/Enter when the name appears correctly or withoutentering a name. The display asks you to press another one-touchnumber.5. To set another one-touch number, press the desired one-touch buttonand repeat steps 2 through 4.Or, to return to Standby mode, press Stop.Editing a Number for One-Touch Dialling1. Press and hold the one-touch button where the phone number hasbeen stored.2. Press ➛or ❿ to move the cursor to the desired number and edit thenumber.Note: When you press the One-Touch dial number stored for group dial,the display briefly shows ‘G-REGISTERED’ to indicate that thenumber is used for group dial, then you can edit the number.3. When you have finished editing, press Start/Enter.Sending a Fax Using a One-Touch Number1. Load the document face down with the top edge first going into thedocument feeder.2. Press the one-touch button where you stored a number. The numberwill be automatically dialled and the document transmitted when theremote fax machine answers.T01:025413000
