Access Codes36PUKThe 8-digit PUK (PIN Unblocking Key) is required to change a disabledPIN. The PUK may be supplied with the SIM card. If not, or you have lost it,contact your service provider.To re-enable your PIN:1. Enter the PUK and press the OK soft key.2. Enter a new PIN of your choice and press the OK soft key.3. When the Confirm New PIN message displays, enter the same codeagain and press the OK soft key.If you enter an incorrect PUK ten times in succession, the SIM cardbecomes invalid. Contact your service provider for a new card.PIN2The PIN2 (4 to 8 digits), supplied with some SIM cards, is required toaccess specific functions supported by those cards.If you enter an incorrect PIN2 three times in succession, the code isdisabled and you cannot access the functions until you re-enable it byentering the PUK2.To change the PIN2, see the Security section in “Set Phone” on page 146.PUK2The 8-digit PUK2 (PIN Unblocking Key 2), supplied with some SIM cards, isrequired to change a disabled PIN2. If you lose the code, contact yourservice provider.To re-enable your PIN2:1. Enter the PUK2 and press the OK soft key.
