Applications 1846. From the Choose your TV Brand screen, tap your TV’smanufacturer name.• If you have a brand of TV not listed or you are using aprojector, select from one of the following two options.Choose from either Other TV Brands or I Have a Projector.7. Aim your device at the TV and tap (Power) toconfirm the set up process completed successfully andthe correct TV IR codes were selected.Note: The process of the initial TV activation can take up to 10seconds. Please do not press the button again.8. If the TV turned on, tap Yes.– or –If the TV did not turn on after tapping (Power) andwaiting 10 seconds, tap No or Retry.9. From the Choose Your TV Tuner screen, select the entrythat corresponds to your current channel controlmethod:• Cable/Satellite/STB/PVR/DVR: selected when changingchannels is done via a receiver box. Channels are notchanged via the TV remote but rather through the receiver/box.• My xxx TV: selected when a signal is fed directly into the TVand no box is used. Channels are changed directly on the TVby using the TV remote and not a box’s remote.Note: Try matching your current channel selection method.10. Select the Satellite Box Brand from the available list. Forexample, DirectTV ® .• If your brand does not appear in the list, tap Other SatelliteBox Brands and follow the on-screen instructions.Important! You must configure your set top box for IRcommunication with your device. If you do not selectMore Info.. below and follow the on-screeninstructions you may not be able to properly use theapplication.
